Service Tips

Welcome to our new "Tips" page.

First tip is how to measure remote cables.For initial installations, measure the distances A and B along an unobstructed path to the throttle and/or clutch connection. Add A and B together then round up to the nearest whole foot. That is the recommended length. Cable bends for most cables should not have less than an 8" radius. Cable bends using Supreme Cables can be as low as 4". Care should be taken to avoid unnecessary cable bends because each bend adds to a cable’s inefficiency and lost motion.

For outboard applications it is necessary to add an additional four (4) feet for the loop that allows unrestricted engine movement.